EVO-MIX N Diet Feeder

  1. Home
  2. EVO-MIX N Diet Feeder

If your buildings or doorways are too narrow to fit a standard machine through, then the EVO-MIX N range is perfect for you. With a total machine width of 2260mm, the EVO-MIX N can fit through most narrow buildings, doorways or passageways. EVO-MIX N ranges from 10-21m³ & is available in single & twin auger configurations.

We have taken on board the comments & views of UK farmer’s, & those experienced in using diet feeders. This has enabled us to offer the best in terms of mixing all ingredients in the most varied of on-farm solutions. Designed in the UK and built to a high specification using the highest quality materials, each machine is specified and built to suit each individual customer requirements. 

EVO-MIX 18N diet feeder

EVO-MIX Diet Feeder Models

EVO-MIX N Single

The EVO-MIX N single is a compact designed diet feeder & ranges from 10-14m³. Being only 2.26m wide, it is ideal for narrow buildings, doorways or passageways, with its straight sided tub & having a short chassis, makes manoeuvring through them quick & easy.

EVO-MIX Single diet feeder

EVO-MIX N Twin

The EVO-MIX N twin ranges from 18-22m³ & is for larger units making multiple loads each day or for smaller herds where all mixing is done in one load. By only being 2.26m wide, it is perfect for farms with narrow buildings, doorways or passageways. With some of the great EVO-MIX features, it can handle any situation it is out in.

EVO-MIX 20N narrow diet feeder

Standout Features

Designed in the UK

The EVO-MIX was designed in the UK with UK farmer’s in mind. Using our experience in diet feeders & with recommendations from operators, we have designed EVO-MIX to make the farmer’s job easy & stress free. EVO-MIX is the best diet feeder for the UK farmer.

Cross-Over Auger System

EVO-MIX uses a cross-over auger system to help mix the ingredients together, which gives your animals a more homogenous mix. The system is fitted to twin & triple machines & is where the augers overlap each other, to move the mix round the tub in a figure of eight fashion. By having overlapping augers, it doesn’t just give a more homogenous mix, it can cut mixing time, as ingredients will be mixed quicker. 

Optimum Height Augers

Having full width & optimum height augers, means the material is brought higher up the tub, giving you a more homogenous mix. Using smooth flighted augers results in needing less power to drive the diet feeder as well as saving fuel & tractor hours. With these factors, EVO-MIX gives you a great mix & saves you time & money.

Marine Grade Stainless Steel

Unlike some of our competitors,, who use a stainless steel alloy, our EVO-MIX machines have 316 marine grade stainless steel options. This will increase the life of your machine, by reducing wear on the mixing components.

Diet Feeder Hotspot

Click on a circle for more information on our diet feeders.

Diet Feeder Technical Data

EVO-MIX N Single

 EVO-MIX 10EVO-MIX 12EVO-MIX 14
Capacity (m³)101214
Length (m)5.355.415.49
Height (m)*2.73 - 2.763.03 - 3.093.33 - 3.36
Height - Under Tub (m)*0.80 - 0.830.80 - 0.830.80 - 0.83
Height - Under Conveyor (m)*0.61 - 0.640.61 - 0.640.61 - 0.64
Tub Width (m)2.262.262.26
Standard Conveyor Width (m)2.352.352.35
Number of Augers111
Number of Auger Helix's2.252.53
Number of Blades Per Auger81012
Standard Number of Contra Knives111
Min. Tractor PTO requirement (HP)707575
Min. hydraulic flow requirement (L)353535

*Height will vary depending on wheels and/or suspension system fitted

Machines can be lowered or raised from the measurements above

Measurements above are guidelines only & may change without warning

EVO-MIX N Twin

 EVO-MIX 18EVO-MIX 21
Capacity (m³)1821
Length (m)7.517.59
Height (m)*2.90 - 2.973.14 - 3.21
Height - Under Tub (m)*0.88 - 1.050.88 - 1.05
Height - Under Conveyor (m)*0.67 - 0.840.67 - 0.84
Tub Width (m)2.262.26
Standard Conveyor Width (m)2.352.35
Number of Augers22
Number of Auger Helix's2.252.5
Number of Blades Per Auger810
Standard Number of Contra Knives22
Min. Tractor PTO requirement (HP)110110
Min. hydraulic flow requirement (L)3535

*Height will vary depending on wheels and/or suspension system fitted

Machines can be lowered or raised from the measurements above

Measurements above are guidelines only & may change without warning

Diet Feeder Gallery

Interested in a demo or want more information?

Please email info@rsagri.com or call 01256 850777

Menu