SABRE 900+ Bale Processor

  1. Home
  2. SABRE Bale Processors
  3. SABRE 900+ Bale Processor

With years of experience in the bale processor sector, we have designed a bale processor that offers a total solution for processing, bedding & feeding, for the UK farmer. The SABRE 900+ is a 9m³ trailed machine, designed & built in the UK.

We have taken on board the comments & views of UK farmer’s, & those experienced in using bale processors. This has enabled us to offer the best in terms of chopping straw in the most varied of on-farm solutions. Designed & built in the UK to a high specification and using the highest quality materials, each machine is built to last. Using this, and the latest manufacturing processes the SABRE 900+ is the best bale processor for the UK farmer.

SABRE 900+ Bale Processor

Standout Features

VariChop Processing System

The VariChop processing system uses multiple features to process the straw down to between 20-60mm for Total Mix Ration (TMR). The VariChop system includes 84 angled blades & 16 swinging flails on the shredding drum/beater, a hydraulically operated chopping gate with 15 stationary blades & a manually adjustable drum/beater concave. Using all these features, the SABRE 900+ gives a clean cut and consistent results on every piece of straw, everytime. 

VariFeed Automatic Load Sensing Conveyor System

The VariFeed automatic load sensing conveyor system will automatically feed the bale into the drum/beater once activated. If it is sensed that drum/beater is slowing down & starting to block, the system will slow down, stop, or reverse the floor conveyor, until the material is dealt with, and the drum/beater has recovered to the set speed. Once returned to the set speed, the floor conveyor will go forward again. This process is completely automatic.

Heavy-duty PTO Shaft Driveline

The SABRE 900+ only machine in the UK to be fitted with a PTO shaft & gearbox driveline with shearbolt protection. This system was designed to make the driveline system completely bullet proof and to handle more power than a belted or chain driveline system ever could. By handling more power, it means your processing time is reduced, this saves the operator time, tractor hours and fuel.

Twin Floor Conveyors

The SABRE 900+ is fitted with twin floor conveyors, this increases efficiency when processing, bedding & feeding. Both conveyors are on separate circuits so you can have the front floor conveyor moving without the rear floor conveyor moving. By having this, it means that you can hold a bale on the rear floor conveyor whilst the front floor conveyor is feeding a bale into the shredding drum/beater. This results in the shredding drum/beater not getting overloaded & gives you a better & more consistent chop.

Bale Processor Hotspot

Click on a circle for more information on our bale processor.

Bale Processor Technical Data

SABRE 900+
SABRE 900+

 900+
Capacity (m³)9
Length (Rear Door Closed) (m)6.02
Height (Chute Folded) (m)2.75
Height (Chute Extended) (m)3.33
Max. Bale Extension Height (m)3.85
Width (m)2.76
Bale Chamber Length (m)3.2
Bale Chamber Height (m)1.12
Bale Chamber Width (m)1.78
Blow Distance (m)20
Standard Tyre Size12.5/80-15.3
Unladen Weight (kg)2700
Number of Floor Conveyors2
Number of Drum/Beaters1
Number of Blades Per Drum/Beater84
Number of Flails Per Drum/Beater16
Maximum Round Bale Diameter (m)1.8
Maximum Rectangular Bale (m)1.2 x 1.2 x 3.1
Min. Tractor PTO requirement (HP)100
Oil Flow Rate (Min.-Max.) (L/min)40-60
Process StrawYes
Bed Loose HousingYes
Feed Baled SilageYes
Feed Clamp SilageYes

Measurements above are guidelines only & may change without warning

Interested in a demo or want more information?

Please email info@rsagri.com or call 01256 850777

Menu